Stat-X First Responder Hand Held Fire Suppression

March 17, 2022

Stat-X First Responder®

1 2 3 4 5Suitable for:

The Stat-X First Responder® is an emergency condensed aerosol fire suppression tool and should be included as part of your on-board on-hand response equipment. The Stat-X First Responder excels at containing and suppressing small early stage fires in an enclosed space before it becomes unmanageable and requires a fire department with water. The use of water increases the damages, downtime, and the cost of recovery.

The Stat-X First Responder is a small, light, handheld unit with a pull actuator designed to be tossed into an enclosed room with an active fire to provide immediate fire suppression. It is an exceptional tool for energy companies for use in manhole fires and underground vaults.

When used by firefighters, it buys time for hose set-up, stops flashover, and it can provide an emergency egress route through a wall of flames. Used by police or the first responder on the scene, it can slow a fire long enough to allow fire departments to arrive.

When would a Stat-X First Responder be used?

Fire Fighter

Scenario A

Firefighter arrives at the scene of an early stage fire. After evacuating people and before additional resources arrive at the scene, toss a Stat-X First Responder into the rooms which are involved with the fire. This will buy time for further rescue and for firefighters to lay hose.

Scenario B

Firefighters are concerned about potential flashover from a fire down a hall and water isn't available yet. Toss a Stat-X First Responder ahead of the firefighters to eliminate many of the contributing factors of a flashover.

Scenario C

A firefighter is trapped or can't get to a victim due to an intense area of fire. Toss a Stat-X First Responder into the flame area for immediate fire suppression.

Police

Scenario A

Police arrive at a vehicle fire as a result of an accident. There are occupants trapped in the burning vehicle and the fire department has not yet arrived. Break a window, toss the Stat-X First Responder into the vehicle to knock down the fire and remove the occupants.

Scenario B

SWAT arrives on site and must deploy "flash bangers" into an area. These flash bangers often ignite combustibles. Toss a Stat-X First Responder into the flame area for immediate fire suppression for entry or to suppress fire while awaiting the arrival of the fire department.

Scenario C

Police arrive on the site of a structure (house) fire, in advance of the fire department. Occupants can be seen or heard in the fire area. Deploy the Stat-X First Responder to possibly attempt rescue or at least suppress and hold the fire in check until the fire department arrives.

Energy Company Employee

Scenario A

The worst case – fire erupts in a manhole with worker stuck in the manhole and either incapacitated or unable to escape though the flames. Co-worker immediately deploys a condensed aerosol Stat-X First Responder and tosses it into the manhole away from the trapped worker. It will suppress/extinguish the fire, buying valuable time for evacuation or power shutdown.

Scenario B

Underground transformer fire, or any below grade enclosed space fire. Just twist and pull the ring, toss a Stat-X First Responder in. It will suppress/extinguish the fire, buying valuable time for evacuation or power shutdown.

Applications

  • Rapid Intervention Teams
  • Electrical Vaults
  • Meth Lab Fires
  • Below Grade Fires
  • Delay Flashover
  • Rapid Temperature Drop
  • High Rise Building Fires
  • Shipboard Fires
  • Vehicle Fires
  • Attic Fires
  • Bilge Fires (Activates under Water)


The Stat-X First Responder is truly a new innovation in fire suppression technology. There is no other like it on the market today. It will not replace anything you are currently using, but it could be a wonderful addition to your arsenal of tools.

Stat-X® and Stat-X First Responder® are registered trademarks. The Stat-X brand is sold worldwide exclusively by Fireaway Inc. under license from R-Amtech International, Inc.

Latest posts

29
Apr
2019
What Type of Fire Suppression System Will Best Suit Your Fire Safety Needs?
Fire suppression systems Canada-wide typically represent a case of “out of sight-out of mind.” When entering a building for the first time few people ask or wonder if there “is ...
30
Nov
2017
What Every IT Professional Should Know About Fire Suppression
There’s a lot of things that could go wrong in a data centre. The costs related to a major data loss can be enormous. And while the likelihood of ...
10
Nov
2014
Kidde Fenwal Chemetron
Newly Expanded Kidde Fire Systems to Unite Fenwal Protection Systems and Chemetron Fire Systems Under One Brand. Nov. 7, 2014 – Kidde Fire Systems announced Friday the unification of Fenwal Protection ...